| Bezeichnung | |
---|
| (±)-?-Methoxyphenylacetic acid for gravimetric determination of Na, ?99.0% (T) | |
| 1,2-Diaminocyclohexanetetraacetic acid disodium salt solution Volumetric, Reag. Ph. Eur., 0.1 M DCTA-Na4, for complexometry | |
| 1,2-Diaminocyclohexanetetraacetic acid monohydrate for complexometry, ?98.5% | |
| 2,6-Dichloroindophenol sodium salt hydrate ?97.0% (calc. based on dry substance, AT) | |
| 2?,7?-Dichlorofluorescein solution Indicator, ready-to-use | |
| 4-(Dimethylamino)benzaldehyde for the determination of hydroxyproline, ?99.0% (HPLC) | |
| Acetic acid concentrate for 1L standard solution, 0.1 M CH3COOH (0.1N) | |
| Acetic acid solution Volumetric, 0.5 M CH3COOH (0.5N) | |
| Acetic acid solution Volumetric, 1.0 M CH3COOH (1.0N) | |
| Acetonitril 50% LabReady™ Solvent Blend, for mass spectrometry | |
| Acetonitril mit 0,1% Ameisensäure LC-MS CHROMASOLV™ LC-MS, LabReady™ Solvent Blend | |
| Acetonitrile with 0.1% Trifluoroacetic Acid CHROMASOLV™ LC-MS, LabReady™ Solvent Blend | |
| Activated charcoal Purum, powder | |
| Ammonium cerium(IV) nitrate solution Volumetric, Reag. Ph. Eur., 0.1 M Ce(NH4)2(NO3)6 | |
| Ammonium cerium(IV) sulfate solution Volumetric, Reag. Ph. Eur., 0.1 M Ce(NH4)4(SO4)4 | |
| Ammonium chloride TraceSELECT™, for trace analysis, ?99.9995% (metals basis) | |
| Ammonium hydroxide solution TraceSELECT™ Ultra, for ultratrace analysis, ?20% in H2O | |
| Ammonium hydroxide solution TraceSELECT™, for trace analysis, ?25% in H2O | |
| Ammonium hydroxide solution Volumetric, 5.0 M NH4OH (5.0N) | |
| Ammonium iron(III) sulfate solution Volumetric, 0.1 M (NH4)Fe(SO4)2 | |
| Ammonium thiocyanate concentrate for 1L standard solution, 0.1 M NH4SCN (0.1N) | |
| Ammonium thiocyanate solution Volumetric, 0.1 M NH4SCN (0.1N) | |
| Barium chloride solution Assay 20% | |
| Barium chloride solution Volumetric, 0.1 M BaCl2 (0.2N) | |
| Barium hydroxide solution Volumetric, 0.05 M Ba(OH)2 (0.1N) | |
| Barium perchlorate solution Volumetric, 0.005 M Ba(ClO4)2 in isopropanol/water | |
| Bimstein granuliert, 2-5 mm Granulated | |
| Boiling stones Sieve analysis >1 mm | |
| Boric acid solution 4% ± 0.05% | |
| Bromide bromate Standard solution Volumetric, 0.05 M Br2 (0.1 N) | |
| Bromide bromate Standard solution Volumetric, 0.25 M Br2 (0.5 N) | |
| Bromine (bromide-bromate) solution Volumetric, 0.05 M Br2 (0.1N) | |
| Bromine concentrate for 1L standard solution, 0.05 M Br2 | |
| Buffer Solution pH 10.00 (20 °C) Certified, colored blue | |
| Buffer Solution pH 4.00 (20°C) Certified, colored red | |
| Buffer Solution pH 7.00 (20°C) Certified, colored green | |
| Buffer Solution pH 9.00 (20°C) Certified, colored yellow | |
| Calcium chloride solution Volumetric, 1.0 M CaCl2 | |
| Cerium(IV) sulfate solution Volumetric, 0.05 M Ce(SO4)2 (0.05N) | |
| Cerium(IV) sulfate solution Volumetric, 0.1 M Ce(SO4)2 (0.1N) | |
| Cesium chloride Lanthanum chloride buffer TraceSELECT™, for flame atomic absorption spectrometry | |
| Cesium chloride TraceSELECT™, for trace analysis, ?99.9995% (metals basis) | |
| Cesium iodide TraceSELECT™, ?99.9995% | |
| Citric acid monohydrate, TraceSELECT™, ?99.9998% ( TraceSELECT™, ?99.9998% (metals basis) | |
| Copper(II) sulfate solution Volumetric, 0.1 M CuSO4 | |
| EDTA dipotassium magnesium salt for complexometry, ?98% | |
| EDTA disodium salt concentrate for 1L standard solution, 0.1 M EDTA-Na2, for complexometry | |
| EDTA disodium salt concentrate with zinc complex added (solution B) for 1L standard solution, 1 ml solution = 1 German degree o | |
| EDTA disodium salt dihydrate Reag. Ph. Eur., 99-101%, ?0.1% NTA (HPLC), for complexometry | |
| EDTA disodium salt solution Volumetric, 0.01 M EDTA-Na2, for complexometry | |
| EDTA disodium salt solution Volumetric, 0.05 M EDTA-Na2 | |
| EDTA disodium salt solution Volumetric, 0.2 M EDTA-Na2, for complexometry | |
| EDTA disodium salt solution Volumetric, for water hardness determination (1 ml = 1 German degree of hardness in 100 ml of water | |
| EDTA disodium salt solution Volumetric, Reag. Ph. Eur., 0.1 M EDTA-Na2, for complexometry | |
| EDTA disodium salt solution with zinc complex added (solution A) Volumetric, for water hardness determination (1 ml = 5.6 Germa | |
| EDTA disodium salt solution with zinc complex added (solution B) 1 ml solution = 1 German degree of hardness in 100 ml of water | |
| EDTA for complexometry, ?99.0% | |
| EGTA for complexometry, ?98.0% (T) | |
| Ethanol 70% in water (v/v) (Taxed) (v/v) (Taxed) | |
| Hanus solution Volumetric, 0.1 M IBr | |
| HYDRANAL™ - Benzoic acid Buffer substance for Karl Fischer titration | |
| HYDRANAL™ - Buffer for Bases Liquid buffer medium for Karl Fischer titration in alkaline samples (based on salicylic acid | |
| HYDRANAL™ - Composite 1 Titrating agent for volumetric one-component Karl Fischer titration (methanol free) | |
| HYDRANAL™ - Composite 2 Titrating agent for volumetric one-component Karl Fischer titration (methanol free) | |
| HYDRANAL™ - Composite 5 K Titrating agent for volumetric one-component Karl Fischer titration in aldehydes and ketones (m | |
| HYDRANAL™ - Composite 5 Titrating agent for volumetric one-component Karl Fischer titration (methanol free) | |
| HYDRANAL™ - CompoSolver E Medium for volumetric one-component Karl Fischer titration (ethanol-based) | |
| HYDRANAL™ - Coulomat A Anolyte for coulometric Karl Fischer titration (methanol-chloroform-based), preferred for cells wi | |
| HYDRANAL™ - Coulomat AD Anolyte for coulometric Karl Fischer titration (methanol-based), preferred for cells without diap | |
| HYDRANAL™ - Coulomat AF 7 for coulometer AF7 | |
| HYDRANAL™ - Coulomat AG Anolyte for coulometric Karl Fischer titration (methanol-based), for cells with and without diaph | |
| HYDRANAL™ - Coulomat AG-H Anolyte for coulometric Karl Fischer titration in long-chained hydrocarbons (methanol-pentanol- | |
| HYDRANAL™ - Coulomat AG-Oven Anolyte for coulometric Karl Fischer titration with oven (methanol-based), for cells with an | |
| HYDRANAL™ - Coulomat AK Anolyte for coulometric Karl Fischer titration in ketones (methanol free), preferred for cells wi | |
| HYDRANAL™ - Coulomat CG Catholyte for coulometric Karl Fischer titration (methanol-based) | |
| HYDRANAL™ - Coulomat CG-K Catholyte for coulometric Karl Fischer titration in ketones (methanol free) | |
| HYDRANAL™ - Coulomat E Anolyte for coulometric Karl Fischer titration (ethanol-based), for cells with and without diaphra | |
| HYDRANAL™ - Coulomat Oil Anolyte for coulometric Karl Fischer titration in oils (chloroform-methanol-xylene-based), prefe | |
| HYDRANAL™ - CRM Sodium Certified reference material for KF titration, produced under DIN EN ISO 17034 accreditation water | |
| HYDRANAL™ - Feuchtigkeits-Testkit Test kit for the visual water determination according to Karl Fischer without titrator | |
| HYDRANAL™ - Humidity absorber Drying agent for air and gases for Karl Fischer titration (with indicator) | |
| HYDRANAL™ - KetoSolver Medium for volumetric one-component Karl Fischer titration in aldehydes and ketones (methanol free | |
| HYDRANAL™ - LipoSolver CM Medium for volumetric one-component Karl Fischer titration in non-polar substances, fats and oi | |
| HYDRANAL™ - LipoSolver MH Medium for volumetric one-component Karl Fischer titration in non-polar substances, fats and oi | |
| HYDRANAL™ - Medium K Medium for volumetric one-component Karl Fischer titration in aldehydes and ketones (methanol free) | |
| HYDRANAL™ - Methanol Rapid Medium for accelerated volumetric one-component Karl Fischer titration | |
| HYDRANAL™ - Molekularsieb 0,3 nm Drying agent for air and gases for Karl Fischer titration | |
| HYDRANAL™ - Puffer für Säure, Puffermedium Liquid buffer medium for Karl Fischer titration in acidic samples (b | |
| HYDRANAL™ - Salicylic acid, Buffer substance for K Buffer substance for Karl Fischer titration | |
| HYDRANAL™ - Sodium tartrate dihydrate Test substance for volumetric Karl Fischer titration (water content ~15.66%, exact | |
| HYDRANAL™ - Solvent CM Medium for volumetric two-component Karl Fischer titration in non-polar substances, fats and oils | |
| HYDRANAL™ - Solvent E Medium for volumetric two-component Karl Fischer titration (ethanol-based) | |
| HYDRANAL™ - Solvent Medium for volumetric two-component Karl Fischer titration (methanol-based) | |
| HYDRANAL™ - Solvent Oil Medium for volumetric two-component Karl Fischer titration in non-polar substances, fats and oils | |
| HYDRANAL™ - Solver (Crude) Oil Medium for volumetric one- and two-component Karl Fischer titration in oils (chloroform-me | |
| HYDRANAL™ - Standard 5.0 Test solution for rough check of volumetric KF equipment | |
| HYDRANAL™ - Titrant 2 E Titrating agent for volumetric two-component Karl Fischer titration (ethanol-based) | |
| HYDRANAL™ - Titrant 2 Titrating agent for volumetric two-component Karl Fischer titration (methanol-based) | |
| HYDRANAL™ - Titrant 5 E Titrating agent for volumetric two-component Karl Fischer titration (ethanol-based) | |
| HYDRANAL™ - Titrant 5 Titrating agent for volumetric two-component Karl Fischer titration (methanol-based) | |
| HYDRANAL™ - Working Medium K Medium for volumetric one-component Karl Fischer titration in aldehydes and ketones (methano | |
| HYDRANAL™ -Wasserstandard 1.0 Standard for Karl Fischer titration (water content 1 mg/g = 0.1%, exact value on report of | |
| HYDRANAL™- Standard-Natriumtartrat-Dihydrat Standard for Karl Fischer titration (water content ~15.66%, exact value on r | |
| HYDRANAL™-Wasserstandard 0.1 Standard for Karl Fischer titration (water content 0.1 mg/g = 0.01%, exact value on report o | |
| HYDRANAL™-Wasserstandard 10.0 Standard for Karl Fischer titration water content 10 mg/g = 1.0%, exact value on report of | |
| HYDRANAL®-Water Standard Oil Oil-based standard for Karl Fischer titration (water content approx. 10 ppm, exact value on re | |
| HYDRANAL®-Xylol Solubilizer for Karl Fischer titration | |
| HYDRANAL®Water Stand.KFOven 220°C230 Standard for Karl Fischer oven check (water content ~5.55%, exact value on report | |
| HYDRANAL®WaterStand. KF-Oven,140-160°C Standard for Karl Fischer oven check (water content ~5.0%, exact value on report | |
| Hydrochloric acid concentrate for 1 L standard solution, 0.01 M HCl (0.01 N) | |
| Hydrochloric acid solution 4 M HCl in H2O | |
| Hydrochloric acid solution Volumetric, 0.01 M HCl (0.01N) | |
| Hydrochloric acid solution Volumetric, 0.1 M HCl (0.1N) | |
| Hydrochloric acid solution Volumetric, 0.2 M HCl (0.2N) | |
| Hydrochloric acid solution Volumetric, 0.5 M HCl (0.5N) | |
| Hydrochloric acid solution Volumetric, 2.0 M HCl (2.0N) | |
| Hydrochloric acid solution Volumetric, 4.0 M HCl (4N) | |
| Hydrochloric acid solution Volumetric, Reag. Ph. Eur., 0.1 M HCl (0.1N) | |
| Hydrochloric acid solution Volumetric, Reag. Ph. Eur., 0.5 M HCl (0.5N) | |
| Hydrochloric acid solution, Volumetric, 6 M HCl (6 Volumetric, 6 M HCl (6N) | |
| Hydrofluoric acid TraceSELECT™, for trace analysis, 47-51% | |
| Hydrogen chloride 2-propanol solution 0.1 M HCl in 2-propanol (0.1N), for Total Base Number, according to DIN 51558-1, volume | |
| Hydrogen peroxide solution Meets analytical specification of Ph. Nord., 34.5-36.5% | |
| Iodide Iodate concentrate for 1L standard solution, 0.005 M I2 (0.01N) | |
| Iodide Iodate concentrate for 1L standard solution, 0.05 M I2 (0.1N) | |
| Iodide Iodate concentrate for 1L standard solution, 1/128 M I2 (1/64N) | |
| Iodine concentrate for 1L standard solution, 0.05 M I2 (0.1 N) | |
| Iodine concentrate for 1L standard solution, 0.25 M I2 (0.5 N) | |
| Iodine solution Volumetric, 0.025 M I2 (0.05N) | |
| Iodine solution Volumetric, 0.05 M I2 (0.1N) | |
| Iodine solution Volumetric, 0.5 M I2 (1.0N) | |
| Iodine solution Volumetric, 0.5 M I2 (1.0N) | |
| Iodine solution Volumetric, Reag. Ph. Eur., 0.05 M I2 (0.1N) | |
| Iron(II) sulfate concentrate for 1L standard solution, 0.1 M FeSO4 | |
| Kalilauge, 0.1 M KOH in ethanol (0.1N) Volumetric, 0.1 M KOH in ethanol (0.1N) | |
| Kaliumhydroxid-Lösung 8.0 mol/l (8,0N) Volumetric, 8.0 M KOH (8.0N) | |
| Karl Fischer Reagent for pyridine-based volumetric one-component Karl Fischer titration | |
| Karl Fischer Reagent Solution A for pyridine-based volumetric Karl Fischer titration (pyridine, sulfur dioxide, methanol) | |
| Karl Fischer Reagent Solution B for pyridine-based volumetric Karl Fischer titration (iodine, methanol) | |
| Kieselgur Pulver, für Filtrationen Powder, suitable for most filtrations | |
| L-Ascorbic acid Puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., 99.7-100.5% (oxidimetric) | |
| L-Ascorbic acid TraceSELECT™, ?99.9998% (metals basis) | |
| Lanthanum nitrate solution Volumetric, 0.1 M La(NO3)3, for the determination of fluoride | |
| Luff-Schoorl Reagent Volumetric, 25 g/L | |
| Magnesium chloride solution Volumetric, 1.0 M MgCl2 | |
| Magnesium matrix modifier solution TraceSELECT™, 2% Mg in <5 wt. % HNO3, 99.9995% | |
| Magnesium sulfate concentrate for 1L standard solution, 0.1 M MgSO4 | |
| Magnesium sulfate solution Volumetric, 0.1 M MgSO4 | |
| Magnesium sulfate solution Volumetric, 1.0 M MgSO4 | |
| Mercury(II) nitrate solution Volumetric, 0.005 M Hg(NO3)2 (0.01N), for the determination of chloride | |
| Mercury(II) nitrate solution Volumetric, 0.01 M Hg(NO3)2 (0.02N), for the determination of chloride | |
| Mercury(II) nitrate solution Volumetric, 0.05 M Hg(NO3)2 (0.1N), for the determination of chloride | |
| Molecular Sieve Dehydrate Beads, with indicator for drying gases | |
| Molecular Sieve Dehydrate Beads, with Indicator For Drying Solvents | |
| Molecular Sieve Deperoxidation Beads, for the deperoxidation and drying of solvents | |
| Molecular sieves, 13X beads, 8-12 mesh Beads, 8-12 mesh | |
| Molecular sieves, 13X Pellets, 1.6 mm diameter | |
| Molecular sieves, 13X Pellets, 3.2 mm | |
| Molecular sieves, 13X Powder, ~2 µm avg. part. size | |
| Molecular sieves, 3A Beads, 4-8 mesh | |
| Molecular sieves, 3A Pellets, 1.6 mm | |
| Molecular sieves, 3A Pellets, 3.2 mm | |
| Molecular sieves, 4A Beads, 4-8 mesh | |
| Molecular sieves, 4A Beads, 8-12 mesh | |
| Molecular sieves, 4A Pellets, 3.2 mm diameter | |
| Molecular sieves, 5A Beads, 8-12 mesh | |
| Molecular sieves, 5A Pellets, 1.6 mm | |
| Molekularsieb 3Å (Rod, size 1/16 in.) Rod, size 1/16 in. | |
| Molekularsieb 3Å, Perlen 8-12 mesh Beads, 8-12 mesh | |
| N,N-Bis(carboxymethyl)-DL-alanine trisodium salt for complexometry, ?90.0% | |
| Natriumacetat wasserfrei TraceSELECT™, for trace analysis, ?99.999% (metals basis), anhydrous | |
| Natriumhydroxid Lösung 2M Volumetric, 2 M NaOH (2N) | |
| Natriumhydroxid-Konzentrat for 1 L standard solution, 0.5 M NaOH (0.5 N) | |
| Natriumoxalat 0,05 Mol/L Volum. Lösung Volumetric, 0.05 M (COO)2Na2 | |
| Natronlauge 5,0 mol/l (5,0N) Maßlösung Volumetric, 5.0 M NaOH (5.0N) | |
| Nitric acid concentrate for 1L standard solution, 0.1 M HNO3 (0.1N) | |
| Nitric acid concentrate for 1L standard solution, 1.0 M HNO3 (1.0N) | |
| Nitric acid Semiconductor grade (Honeywell 17818), ?65% | |
| Nitric acid Semiconductor grade VLSI (Honeywell 17512), 69-71% | |
| Nitric acid solution 25%, for argentometric titration | |
| Nitric acid solution Volumetric, 0.1 M HNO3 (0.1N) | |
| Nitric acid solution Volumetric, 1 M HNO3 (1N) | |
| Nitric acid solution Volumetric, 2 M HNO3 (2N) | |
| Nitric acid TraceSELECT™ Ultra, for ultratrace analysis, 67-69% | |
| Nitrilotriacetic acid for complexometry, ?99% | |
| Oxalic acid concentrate for 1L standard solution, 0.005 M (COOH)2 (0.01N) | |
| Oxalic acid concentrate for 1L standard solution, 0.05 M (COOH)2 (0.1N) | |
| Oxalic acid dihydrate Puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ?99.5% (manganometric) | |
| Oxalic acid dihydrate TraceSELECT™, ?99.9999% (metals basis) | |
| Oxalic acid solution Volumetric, 0.05 M (COOH)2 (0.1N) | |
| Oxalic acid solution Volumetric, 0.1 M (COOH)2 (0.2N) | |
| Oxalic acid solution Volumetric, 0.5 M (COOH)2 (1N) | |
| Perchloric acid concentrate for 1L standard solution, 0.1 M HClO4 (0.1N), for titration in non-aqueous medium | |
| Perchloric acid solution Volumetric, 0.01 M HClO4 in acetic acid (0.01N), for titration in non-aqueous liquids | |
| Perchloric acid solution Volumetric, 1.0 M HClO4 (1.0N) | |
| Perchloric acid TraceSELECT™ Ultra, for ultratrace analysis, 67-72% | |
| Perchloric acid TraceSELECT™, for trace analysis, 65-71% | |
| Phosphoric acid TraceSELECT™ Ultra, for ultratrace analysis, ?85% | |
| Phosphorsäure für die Spurenanalyse, ~85% TraceSELECT™, for trace analysis, ~85% | |
| Potassium bromate concentrate for 1L standard solution, 1/60 M KBrO3 (0.1N) | |